Water-based Coatings
H.B. Fuller’s HydroArmor®-branded latex and modified rubber water-based coating product line is your solution to prevent/minimize corrosion and extend the life of coated substrates. They are designed for excellent adhesion to aluminum, steel, stainless steel, wood, and fiberglass. Moreover, they are highly resistant to impact and capable of withstanding long exposures to humidity, heat, salt spray, and for certain products, UV, without compromising the integrity of the coating. These coatings can quickly build a high level of water resistance and are formulated to provide very good corrosion protection when applied with a wet film thickness as low as 20 thousands of an inch. These solutions can be easily applied by spray, brush or roller onto overhead and vertical surfaces to seal joints. Heavy wet film builds can be applied without runs, drips or sagging to bridge seams. H.B. Fuller’s latex and modified rubber water-based coatings are available in a wide range of solutions, including fire resistant, anti-wicking, oily metal compatible, and lightweight.