Weld Mount
Benefits of Weld Mount
Structural adhesive bonding offers a variety of advantages over other joining techniques. First, structural adhesive bonding does not allow for the compromise of the substrate, therefore, there is no room for water ingress. When bonding dissimilar metals, Weld Mount acts as an insulator, eliminating galvanic corrosion. Finally, structural adhesive bonding supports improved fatigue resistance, enhanced resistance to shock and vibration and advanced thermal cycling over mechanical or welded assemblies.
Other advantages include:
- Increased longevity of products
- Improved weight reduction
- Enhanced structural appearance
- Guaranteed mounting solution
- Eliminated stress point concentrations
- Advanced load-bearing capacity
Products
Weld Mount's offering of adhesively bonded fasteners and a wide range of adhesives are designed to be bonded to almost any substrate. We supply wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All our fasteners can be mounted with our unique, no-slide acrylic adhesives. These adhesives hold the parts in place on a vertical or overhead surface, providing a permanent high-strength bond, as well as our many other adhesive choices.
Fasteners
Weld Mount's selection of fasteners is designed to be adhesively bonded to almost any substrate. We offer wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All of our fasteners can be mounted with our unique no-slide acrylic adhesives which hold the parts in place on a vertical or overhead surface, providing a permanent high-strength bond with no need for auxiliary retention or fixturing.
Wire Tie Mounts & Strap Mounts
Weld Mount offers a wide variety of wire tie mount attachment options to solve any wire management challenge. We make these fasteners from a variety of materials to suit different application and load requirements. All of these fasteners can be mounted with our unique, no-slide acrylic adhesives. These adhesives hold the parts in place on a vertical or overhead surface while gathering working strength, providing a permanent high-strength bond.
Weld Mount offers a complete line of Stainless-Steel Studs to meet any attachment point challenge. These parts are best bonded with Weld Mount AT-8040 or AT-6030.
Thread sizes from 832 to 3/8 and base sizes from .62 inches to 2 inches. We also offer a full line of Type 316 Stainless Metric Studs.
For a detailed description of each product and available dimensions, please visit our product guide.
Standoffs, Nut Plates & Fasteners
We offer wire tie mounts, hose and cable clamps, studs, standoffs and floating nut plates. All our fasteners are mounted with our unique no-slide acrylic adhesives which hold the parts in place on a vertical or overhead surface, providing a permanent high strength bond.
We are now offering Type 316 Metric Nut Plates as well as Fine Pitch and our FNR series of Replaceable Nut, Nut Plates.
For a detailed description of each product and available dimensions, please visit our product guide.
Cable & Hose Clamps
Weld Mount clamps are available as single or double units. Each is designed to be mounted using our ¼" x 20 Weld Mount studs. The charts below detail the studs required for each size of clamp. The clamps are manufactured of black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. These clamps are available at a per-piece price with no minimum quantities or at a reduced price based on the purchase of bag quantities. Other sizes are available. Maximum hose OD is 1 inch.
For a detailed description of each product and available dimensions, please visit our product guide.
Adhesives
The heart of the Weld Mount System is our acrylic adhesives, specifically formulated to be used with our pieces. They are high strength/high viscosity structural methacrylates with incredible strength in both tensile and in shear. We have a range of different adhesives depending on your application requirements.
All adhesives are in B-System Cartridges, meaning the nozzle is designed to prevent cross-contamination. This allows for repeated use of a partially emptied cartridge.
System Kits
Weld Mount System has created several kits with commonly used parts. Each kit contains a wide range of parts, adhesives, and adhesive dispensing guns for you to try the Weld Mount System firsthand.
