The Glue Talk Blog
Nearly every case and carton adhesive application in converting involves the use of a hot melt adhesive to seal the flaps. The adhesive is applied at an elevated temperature to one flap, which is then placed in contact with the surface of the secondary flap. These are then compressed to form a bond that seals the case or carton.
Naturally, your production crew is striving to get optimal performance from these hot melt adhesives—but doing so requires a basic understanding of the many factors that can impact the performance of the hot melt. These include substrate, substrate temperature, application temperature, application amount, compression time, and open time. In addition to these common variables, there are other factors that can also affect the performance of your hot melt, including:
- Changes in ambient conditions, even for a short time. For example, opening a nearby dock door in a cold environment or using a fan in hot conditions.
- The use of substrates that were stored in unheated warehouses and weren’t brought to room temperature prior to use.
- Applying more adhesive in search of better bonds. Too much adhesive can actually slow down the set time and create cases that open right out of compression.
- A switch to a new supplier of cases or cartons.
Also, because the typical hot melt used in converting is thermoplastic, it is susceptible to softening under higher temperatures. Your hot melt selection should be driven not only by the parameters of the converting line but the environment the sealed case or carton will see during shipping.
One more thing to keep in mind is that the listed melt temperature or softening point of an adhesive is not an indication of its heat resistance performance. For example, a hot melt may soften at 221°F, while its heat resistance is only good for 150-160°F.
Click here to learn about our case and carton sealing capabilities.
Blog Categories
Blog Categories
Archive
-
2024
- January (1)
- March (1)
- April (1)
- May (2)
- June (2)
-
July (5)
- Emerging Trends in Commercial Roofing and the Pivotal Role of Adhesives
- How Adhesives Advance Eco-Friendly Food Packaging
- How to Build the Beauty Brand of Your Dreams
- Sustainability Terminologies: A Journey Into the Words that Define Environmental Impact
- The Power of Silicone Adhesives and Sealants in Solar Panel Applications
- August (4)
- September (4)
- October (1)
- November (2)
- 2023
-
2022
- February (4)
- March (3)
- April (1)
- May (2)
- June (5)
-
August (6)
- Beverage Labeling Market In Africa: A Huge Potenial
- H.B. Fuller’s Glue House: Scavenger Hunt
- Increasing Global Aging Population: Impacts and Challenges
- Innovations and Key Challenges in Sustainable Disposable Absorbent Hygiene Products
- Supporting Racial Equity in Our Community
- Top 5 Reasons to Invest in H.B. Fuller
- September (4)
- November (2)
- December (2)
-
2021
- January (3)
-
February (7)
- Celebrating Exceptional Service During COVID-19 Complications
- Cyanoacrylates: What They Are and What They Do
- Innovative two-shot bookbinding adhesive
- Make a Difference 2020
- Problem Solving: Paper straws in drinking beverages
- Stronger straws
- Substances of Interest in Disposable Absorbent Hygiene Products
- March (4)
- April (4)
- May (4)
- June (5)
- July (2)
- August (5)
- September (2)
- October (1)
- November (3)
- December (2)
-
2020
- January (4)
- February (2)
- March (3)
- April (4)
- May (3)
-
June (7)
- Community Support in the Era of Coronavirus
- Employee Creates Face Shields with 3D Printer
- Improved Packaging Integrity and Greater Customer Satisfaction
- Liquid-Resistant Paper Straws
- What is a Sealant
- What Is the Future of Commercial Disinfectants
- Winning over consumers with e-commerce packaging solutions
-
July (6)
- Employees Take Action to be Part of Healing and Growth
- Gain a competitive advantage with packaging adhesive solutions
- HB Fuller Company Foundations Commitment to Communities
- Packaging Solutions for the South African Agriculture Market
- Supporting Organizations That Provide STEM Education for Youth
- Where Does Sustainability Stand Amid COVID-19
- August (3)
- September (2)
- October (4)
- November (2)
- December (4)